TECHNICAL SPECIFICATIONS |
||||||||
Model |
47-BKZ-12 |
48-BKZ-24 |
412-BKZ-12 |
415-BKZ-24 |
518-BKZ-12 |
525-BKZ-24 |
530-BKZ-24 |
530-BKZ-48 |
Nominal Battery Voltage |
12V |
24V |
12V |
24V |
12V |
24V |
24V |
48V |
Cont. Rating 25 deg |
700W |
800W |
1300W |
1600W |
1800W |
2500W |
3000W |
3000W |
Cont. Rating 40 deg |
600W |
700W |
1200W |
1500W |
1600W |
2300W |
2700W |
2700W |
1/2 Hour Rating |
950W |
1050W |
1600W |
2100W |
2000W |
3100W |
3700W |
3700W |
Surge (5 Seconds) |
2400W |
2800W |
4000W |
5000W |
5000W |
7500W |
9000W |
9000W |
Battery Voltage Range |
10.5 - 17V |
21 - 34V |
10.5 - 17V |
21 - 34V |
10.5 - 17V |
21 - 34V |
21 - 34V |
42 - 68V |
Instantaneous Shutdown |
9V |
18V |
9V |
18V |
9V |
18V |
18V |
36V |
Peak Efficiency |
90% |
92% |
91% |
94% |
90% |
94% |
93% |
95% |
Standby Current |
35mA |
25mA |
40mA |
30mA |
46mA |
43mA |
44mA |
35mA |
Inverter On-No Load |
0.44A |
0.28A |
0.65A |
0.65A |
0.7A |
0.49A |
0.49A |
0.35A |
Weight |
10Kg |
10Kg |
13Kg |
14Kg |
22Kg |
22Kg |
24Kg |
24Kg |
Dimensions |
310mm (L) x 260mm (W) x 145mm (H) |
380mm (L) x 400mm (W) x 180mm (H) |
Demand Start Sensitivity |
0-20W |
|
Output Frequency |
50Hz +/- 0.02% |
|
Output Waveshape |
True Sinewave |
|
Total Harmonic Distortion |
<4% |
|
Output Voltage (No Load to Full Load) |
240V AC +/- 4% |
|
Input/Output Isolation (AC to DC) |
3500V |
|
Operating Temps |
-10ºC to +50ºC |
|
Standards |
C-Tick, CE, AS2279, AS3000, AS3001, EN55014, EN50082-1, IEC10004-2 , IEC10004-4, IEC10004-5, IEC10004-6 |
|
Power Factor |
All Conditions |
|
Protection Circuitry |
Overtemperature |
|
Battery Leads |
1.5m long with 10mm mounting lug |
DC Isolation |
Thermal/Magnetic Circuit Breaker |
Output Wiring |
Dual switched GPO and Junction box on rear |
Chassis |
Powder coated 3mm Aluminum |
Warranty |
3 Years parts & labour |
 |
AUSTRALIA |
 |
LD Series
Camping and caravaning is great. Unfortunately, you can't plug your lights into a tree. Well, we've just added the LD series to our range. These compact True Sine Wave power inverters are great when you want 240V mains style power in a situation where power is not available. The LD series also features our exclusive new Thermal Share Technology (TST). |
 |
SE10 Inverter
A compact 350W True Sine Wave DC-AC power inverter to provide you with mains-style electricity wherever you are. Comes in 12V DC and 24V DC input models. |
 |
SE12 Inverter
The big brother to the SE10. Available in 12V DC (600W) and 24V DC (700W) input models. |
 |
Energy Management Mk II
The Energy Management Mk II has the ability to read, log, regulate and control your system from either the front panel of your SA inverter, a remote keypad, or remote computer, via a phone line and modem. The SE22, SE32 and SE42 range of sine wave power inverters are all upgradable with our new Energy Management Mk II SE22 Inverter This inverter will operate on either 12V DC (at 1300W) or 24V DC (at 1600W). SE32 Inverter The 24V DC, 2400W continuous inverter can supply up to 7000W surge. SE42 Inverter The SE42 is the latest in our range, with 20% more sheer grunt then the SA41 it replaces. This 48V power inverter can continuously supply 3600W. |
 |
The new Selectronic series of wall mount inverters.
WM800, WM1000, WM1200 & WM1500 units are a range of 12 and 24V inverters featuring our new Thermal Sharing Technology (TST). Find out more about the new WM series here. |
 |
 |
SA Series Accessories
A range of optional accessories are available for SA series inverters, including a remote keypad. |
 |
PWM60 Charge Regulator
A high performance, low cost regulator to suit Selectronic SA22, SA32 and SA42 inverters. |
 |
SYR15 AC Synchronous Relay
A highly versatile AC Synchronous Relay, the SYR15 can be used to switch a variety of 240V loads. Features include solid state and zero crossing switching. |
 |