![]() |
![]() ![]() |
These Marlec 2D Lights are made in England, and feature a Thorn 2D fluorescent tube which gives almost the light output of a 100 watt globe but uses only 15 watts of power. It has been found to be really effective in situations, for example, in a caravan over the dining table, where good clear light is required for many hours at a time, without the light being too glary close up, or the light fitting protruding too low over the table.
These lights give a good long service life, have an on/off switch on the side, and are very suitable for use in mobile situations where they seem to be unaffected by vibrations and bumpy roads.
|
Labcraft 2D lights are now supplied in a tough vandal-resistant opal plastic surface-mount light with a white toggle switch on one side. We have found them to be ideal for nature-loo composting toilet enclosures for remote sites because of their durability, great light output, and reliability. |
|
| Crystalite is a strong and cost effective light suitable for a range of vehicles from motorhomes to trucks and vans. It has proven highly successful and is available in both recessed and surface mounted variations. Projection of the recessed unit is a mere 5mm with a recessing depth of 17mm. The chassis is fabricated from Aluminium sheet and secures both the inverter and the fluorescent tubes. | ![]() |
| 12 volt surface-mount 16 watt 2D fluorescent(150mm, switch, 1020 lumens) | $ 75 |
| Crystalite surface mount 12 volt twin 8 watt fluorescent, with push switch | $ 68 |
| Crystalite surface mount 24 volt twin 8 watt fluorescent, with push switch | $ 88 |
| Crystalite recessed 12 volt twin 8 watt fluorescent, with push switch | $ 68 |
| Crystalite recessed 24 volt twin 8 watt fluorescent, with push switch | $ 88 |
![]() |
| ||||
![]() |
|
![]() |
|
![]() |
|
||||||
![]() |
|
![]() |
|
||||||||||
![]() |
|
|
|
||||||||
|
![]() |
||||||||
|
![]() |
![]() |
|
![]() |
This stand alone solar powered bollard is ideal for applications where there is sunlight all day, yet the area is dark at night, and where it is difficult or unacceptable to dig up the existing paving to install electrical wires.
The bollard automatically turns on at dusk and run all night. The soft light illuminates the pathway without being so bright as to disturb the ambience of the surrounds. Height of bollard is approximately 700 mm Price: $160 |
![]() |
Solar powered pavers are solid pavers containing solar cells and coloured leds that automatically switch on at dusk.
As they contain no battery, there is no maintenance, and they can be safely cemented into the ground. They are strong enough to drive on, and are unaffected by foot traffic. The soft light illuminates the pathway without being so bright as to disturb the ambience of the surrounds. The solar pavers are available in two common paver sizes. square: 200 x 200 x 60 rectangle: 200 x 100 x 56 LED colours available: red, orange, amber, blue, green, white Price: $320 and $240 |
![]() |
Looks just like the 240 volt version !
These globes are cheap and hardy, and are particularly good for applications where the light is not likely to be run for many hours at a time, and where an economical solution is called for. Available in 12 volt and 24 volt, bayonet cap and edison screw. Wattages are 15, 25 and 40 watt Price: $ 7 each |
|
![]() |
![]() |
12 volt and 24 volt movement sensors are available to control your solar powered lights. |
Morningstars advanced SunLight solar lighting controller combines the SunSaver regulator with a microcontroller for automatic lighting control functions. |
![]() |
| This technology provides:
Proven Reliability Precise Lighting Control PWM Battery Charging Operation: Rotary digital switch to select among 10 lighting options (see below) Test button flashes red LED to confirm correct rotary switch selection Test button turns lights on for 5 minutes (in LVD limited to 3 times) Low voltage disconnect overrides lighting timer Sunrise overrides lighting timer Timer accuracy is within 2 seconds |
Four Versions Available:
12 Volt: 10 and 20 amp ratings 24 Volt: 10 and 20 amp ratings Features: Microcontroller digital accuracy Fully automatic operation Ten field adjustable lighting control options Special on/off/on functions Manual test capability Low Voltage Disconnect override protection Detects day and night using the PV array Suitable for all 12 & 24 volt dc lamps Sealed/Flooded battery select Temperature compensation Parallel with a SunSaver for 40 amps solar Includes SunSaver battery charging circuit |
| LIGHTING CONTROL OPTIONS |

![]() |
Mechanical Specifications
Wire size #10 AWG (5.2 mm) Anodized aluminum case Marine rated terminals Epoxy encapsulated Weight is 9 oz (0.26 kg) Electrical Specifications
|
To Order or Contact Us