Solazone Wind Turbines

Solazone Horizontal Wind Turbines

Built to Australian specifications, these hardy machines have been used locally for several years.

They are reliable and quiet, and are ideal for both marine and land-based applications.

Installation is very simple, and can be performed by one or two people with just hand tools, in just a couple of hours.

Solazone 400w wind generator in Mooloolaba

Solazone 400w wind generator in Mooloolaba

  • External parts are powder-coated aluminium or carbon-fibre plastic, with quality stainless steel fixing screws and nuts.
  • Marine models are all protective-coated on the inside to ensure long life.
  • Strong blades – latest carbon fibre blade design allows up to 40 m/s wind speeds.
  • Quiet blade design – special blade moulding breaks up laminar flow across the blades, reducing noise.
  • High wind protection – blades bend out of shape in very high wind, protecting the wind generator.
  • Ideal for boats and marine environments, as well as on land.
  • Matching battery charge controller included.
  • Mount to a standard 48 mm locally available stainless steel, or galvanised pipe.
  • Simple installation, using a 3-wire cable (not supplied) between the wind generator and the charge controller.
  • From the controller to the battery use twin 6mm double insulated wire, or heavier.

 

Showing inside the Ultra 400 wind generator

Showing inside the Ultra 400 wind generator

Latest carbon fibre blade design

Latest carbon fibre blade design

 Latest Models

Horizontal Off-grid Wind Turbine ModelsOutputVoltage
Ultra X300 Marine 100 – 250w12, 24 volt
Ultra X400 Marine 400 – 500w12, 24 volt
Ultra X600 500 – 900w12, 24, 48 volt
Ultra X2000 1.5 – 2 kw24, 48, 96, 110 volt

 

X400 models – 12 or 24 volt

 

Ultra 400 Wind generator packaged, ready for assembly.

Ultra 400 Wind generator packaged, ready for assembly.

Rated output power400 watt
Maximum power500 watt
Voltage12 volt & 24 volt
Start wind speed2.5 m / s
Rated wind speed11 m / s
Security wind speed45 m / s
Gross weight9 kg
Rotor diameter1250 mm
No of blades3
Recom tower hght6 metres
Blade materialCarbon fibre reinforced plastic
Generator type3 ph perm magnet synchr generator
Control systemElectromagnetic / lateral wind control

 

X600 models – 12, 24, 48 volt

Ultra S600 Quiet, with 3 carbon fibre blades

Ultra S600 Quiet, with 3 carbon fibre blades

Rated output power600 watt600 watt600 watt
Maximum power560 watt700 watt960 watt
Voltage12 volt24 volt48 volt
Start wind speed2 m / s
Rated wind speed13 m / s
Security wind speed45 m / s
Gross weight15 kg
Rotor diameter1850 mm
No. of blades3
Recommended tower height6 metres
Blade materialCarbon fibre reinforced plastic
Generator type3 phase permanent magnet synchronous generator
Control systemElectromagnetic / lateral wind control

 

 X2000 models – 24, 48, 96, 110 volt

 

 

The X2000 wind turbine system is the best small wind generator system available in the world. Simple to install, super-quiet, low start-up-speed, and high-output, together with the adaptation of European advanced technologies and design, makes it the best performing wind generator system in the world.
The unique technology:

Integrating several forward-thinking ideas into one machine, which is easy to install, affordable and maximizes energy production.
– Leading-edge high-output dual-bearing permanent magnet alternator,
– Carbon-filled rotor blades, which have been optimized for high torque, low rotational inertia, and exceptionally quiet output.
– World-class aerodynamic efficiency
– Double Security System
– Exceptionally low yaw-error
1. Generator

The Neodymium Iron Boron permanent magnet rotor uses patented technology licensed from Sumitomo/Hitachi in Japan. A low-friction, high-energy-density 3-phase rare-earth magnet rotor design, which came from concepts and materials used in leading-edge green-energy vehicle research.

Having two bearings allows the wind turbine to start faster than a single bearing wind turbine. Thanks to this technology you can start producing energy at wind speeds as low as 1.5 m/s. the Double bearing system also has the advantage of reducing vibration.
2. Blades

Carbon fibre filled blades, whose design adopts the idea from biomimicry, and leads to a significant reduction in weight and tip deflection, with direct effect on the rotational inertia, aerodynamic performance and energy capture efficiency of the blades. This makes for super-quiet performance while improving overall aerodynamic power. The blade and tail design focuses on several key strategies:
– Low Start-up Speeds
– Very Low Rotational Inertia
– Very Low Noise at Optimum Tip Speeds
– Very Low Yaw Error
– Flexible twist under strong gusts 

 

Specifications:

Complete 1500W Wind System (includes generator and controller)

Blade Diameter (1.9m)
Light weight 24.5kg
30% Carbon Polymer Blades
Super-silent (32dB at 5M at 5 m/s )
3-Phase dual-bearing AC rotor generator
Neodymium Iron Boron (Nd2Fe14B) permanent magnet synchronous design
Available in 24V or 48V or 108V designs; available off grid systems and grid tie systems
2.5m/s cut-in speed (Lowest start-up speed for 1500W)
Over and Under-charge protection
Integrated slip-ring allowing continued >360° rotation
60mm tubing or according to customer request
Simple installation, and user-serviceable components
Fully compatible with existing solar installations
Double epoxy powder painting
5-year warranty

For more details of X2000 model see here:
   
For Vertical Axis Wind Turbines see here:

 

Order now, or ask a question:

Queensland:    (07) 5448 8304      qld at solazone.com.au

Victoria:            (03) 9808 7337      vic at solazone.com.au

or use this form:





Print Friendly, PDF & Email